Hello!Welcome to the official website of Mi'ou
中文版中文版 maskmask
Miou - conveyor belt Source factory R & D customization

Industry knowledge

当前位置:Home > News Center > Industry knowledge
What points should be paid att

Sidewall conveyor belt is a common type of conveyor belt, which can be used to separate products and prevent accumulation when conveying products. It can be used as flat conveyor or climbing conveyor belt. Like other conveyor belts, the baffle conveyor belt should be well maintained before it can be used for a longer time. What points should be paid attention to when using the baffle conveyor belt?    


1. Prevent conveyor belt from load starting


Measures should be taken in time to correct the problem when starting the conveyor belt with the rib. The layers of different types and specifications of conveyor belt should not be used at the same time, and the vulcanization method should be adopted for the joint. The type, structure, specification and number of layers of conveyor belt should be reasonably selected according to the use conditions of rib conveyor belt. Generally, the running speed of conveyor belt should not be greater than the standard, the block size is large, the wear-resistant material is high, and the use of fixed pear discharge device should be as low as possible.


2. The feeding direction shall be the working direction of conveyor belt


The relationship between the diameter of transmission drum and the distribution of conveyor belt, the matching of transmission drum and reorientation drum and the angle of roller groove should be reasonably selected according to the design. The feeding direction should be the working direction of the conveyor belt. In order to reduce the impact of materials on the rib conveyor belt, the chute should be used to reduce the material drop distance. The material section of the conveyor belt should shorten the distance between the roller paths and the leakage of the buffer roller. The soft and medium baffle should be used for the conveyor belt to avoid the gear plate.


3. Use the belt to be lubricated


In use, it should be added and repaired in time to prevent the leakage between the drum and the belt, and pay attention to the lubrication of the moving part of the conveyor belt instead of the oily conveyor belt. Avoid the side conveyor belt passing through the frame, column or block to prevent breakage and cracking. If the local damage of the conveyor belt is found, the artificial cotton should be used to repair in time to avoid expansion.


The above is about the sidewall conveyor belt need to pay attention to the details of the introduction, I hope to help you. Welcome to inquire and understand.

PVC Belt Food belt Treadmill belt Products Company Album Contact Us Web site map

Concern us


Contact us

  • Tel :+86-15900940696
  • Add :41 Sanjiang East Road, Yuecheng District, Shaoxing City, Zhejiang Province, China.
  • Email
Copyright © 2024 All Rights Reserved. Zhejiang Miou Industry Belt Sh 版权所有浙ICP备17018385号-1